Weifang, Shandong, China 中文
TANKOOLSMART EQUIPMENT
TANKOOL remote-controlled tracked mowers on a hillside

Remote-controlled & walk-behind mowers

Built to cut
where others
won’t go.

Tracked brush mowers that hold 30° slopes, clear dense growth and keep the operator up to 150 m away. 500–1000 mm decks, gasoline or diesel, built in Weifang, China.

500–1000
mm cutting width
≤30°
slope capability
150m
remote range
12×
configurations · 4 series
Factory-direct In-house manufacturing Gasoline & diesel OEM & ODM Worldwide shipping

TANKOOL · 坦酷智能

The mower is the easy part.
The terrain is the problem.

Steep embankments, orchard rows, solar arrays, overgrown ground — conventional mowers either cannot get there or put the operator at risk. We build tracked platforms that go where the work is, with the deck, engine and controls to match.

How we build them

The range

Four series.
One tracked platform.

Start with the cut: 860 mm, 1,000 mm, a 600/900 mm rotary finish deck, or a 500–860 mm walk-behind. Then choose the engine and controls.

Why TANKOOL

Engineered around slope,
brush and safety.

Not a catalogue of parts — one platform refined for the three things that decide whether a vegetation-control job gets done.

The operator stays out of the danger zone

Start, stop, drive and lift from up to 150 m away. No one on the slope, no one behind a deck that throws debris.

Tracks that hold a 30° slope

150–180 mm rubber tracks, a low centre of gravity and an 800 W brushless drive keep grip on banks, ditches and side slopes.

Flail decks that mulch as they cut

45–62 swing flails retract on impact and chop growth into mulch, leaving a clean 2–16 cm stubble.

12 to 28 hp, gasoline or diesel

Kai'ao, Loncin and Dajiang engines matched to the deck. Diesel options available on the 860 and 1000 platforms.

One platform, many configurations

Flail or rotary deck, wheeled or tracked, manual or remote lift — configure the machine around the job, not the other way round.

Built in-house, not assembled from catalogues

Laser cutting, CNC bending, robotic welding, powder coating and final test all happen at our own production base.

HW-860 remote-controlled flail mower HW-860

Flagship · 860 Series

The 860 does the work of a small crew.

860 mm of cut, 50 swing flails and a 12–28 hp engine range. Remote start, remote lift and 150 m of range are standard — and the same platform is available with a full metre of cutting width.

  • Three engine options: 12 hp, 15 hp or 28 hp
  • 2–16 cm cutting height with 50 swing flails
  • 335–351 kg · 150/160 mm tracks · ≤30° climbing
  • Manual or remote deck lift, electric or remote start

Made in Weifang

In-house from laser-cut steel
to final test.

We design the platform, build the tooling, cut and bend the steel, weld the frames and assemble every machine at our production base in Anqiu, Weifang — China's agricultural machinery cluster.

TANKOOL production base in Anqiu, Weifang Production base · Anqiu, Weifang
100%In-house assembly & test
4 / 12Series / configurations
500–1000Cutting widths, mm
≤30°Rated climbing ability
  • 01Laser cutting & CNC bending
  • 02Robotic welding of frames and decks
  • 03Powder coating and final assembly
  • 04Full-machine test before packing

How we work

From your terrain
to your container.

A straightforward export process: tell us the job, we configure the machine, build and test it, then ship it with the paperwork and spares you need.

01

Tell us the job

Terrain, slope, growth, target width and engine preference.

02

Configure & quote

We recommend a model, deck and options, then quote FOB, CIF or DDP.

03

Build & test

Your order is built, assembled and test-run before packing.

04

Ship & support

Crated for sea freight, with loading plans and spare-parts kits.

Questions

Before you specify.

Still unsure which deck or engine fits? Send us a photo of the ground and we will tell you.

Which mower works on a 30° slope?
Every tracked model is rated to 30°. For long side slopes, choose the 1000 Series with 160/180 mm tracks; the 860 is also available with a wider track option for extra stability.
Flail deck or rotary deck?
Flail decks (860, 1000, M Series) chop rough brush, weeds and saplings and mulch the cuttings. Rotary decks (P600, P900) give a cleaner finish for lawns, parks and solar-farm grass control.
Can you supply diesel engines?
Yes. Diesel options are available on the 860 and 1000 platforms. Tell us your destination and we will confirm the engine configuration that meets local emissions rules.
Do you offer OEM and ODM?
Yes. We can apply your brand, decals and packaging, and adjust deck, track or control configuration for volume orders.
How are the machines shipped?
Machines are crated and loaded at Qingdao port. We provide loading plans for 20ft and 40ft containers and can quote FOB, CIF or DDP depending on your destination.
“Together, we care for every grassy slope.” TANKOOL · Weifang, Shandong

Get a quote

Tell us what you need to cut.

Send your terrain, target width and engine preference. We will recommend the right model and quote freight to your port.

WhatsApp